Use is subject to License Terms. Your use of this web site or any of its contents or software indicates your agreement to be bound by these License Terms.

Copyright © 2006 Sun Microsystems, Inc. and Motorola, Inc. All rights reserved.

javax.microedition.media.control
Interface ToneControl

All Superinterfaces:

Control

public interface ToneControl

extends Control

ToneControl is the interface to enable playback of a user-defined monotonic tone sequence.

A tone sequence is specified as a list of tone-duration pairs and user-defined sequence blocks. The list is packaged as an array of bytes. The setSequence method is used to input the sequence to the ToneControl.

The syntax of a tone sequence is described in Augmented BNF notations:

 sequence              = version *1tempo_definition *1resolution_definition 
		             *block_definition 1*sequence_event

 version               = VERSION version_number
 VERSION               = byte-value
 version_number        = 1	; version # 1

 tempo_definition      = TEMPO tempo_modifier
 TEMPO                 = byte-value
 tempo_modifier        = byte-value 
              ; multiply by 4 to get the tempo (in bpm) used 
              ; in the sequence.
 
 resolution_definition = RESOLUTION resolution_unit
 RESOLUTION            = byte-value
 resolution_unit       = byte-value

 block_definition      = BLOCK_START block_number 
                            1*sequence_event 
                         BLOCK_END block_number
 BLOCK_START           = byte-value
 BLOCK_END             = byte-value
 block_number          = byte-value 
              ; block_number specified in BLOCK_END has to be the 
              ; same as the one in BLOCK_START 

 sequence_event        = tone_event / block_event / 
                           volume_event / repeat_event
 
 tone_event            = note duration
 note                  = byte-value ; note to be played
 duration              = byte-value ; duration of the note

 block_event           = PLAY_BLOCK block_number
 PLAY_BLOCK            = byte-value
 block_number          = byte-value 
              ; block_number must be previously defined 
              ; by a full block_definition

 volume_event          = SET_VOLUME volume
 SET_VOLUME            = byte-value
 volume                = byte-value ; new volume

 repeat_event          = REPEAT multiplier tone_event
 REPEAT                = byte-value
 multiplier            = byte-value  
              ; number of times to repeat a tone

 byte-value            = -128 - 127
              ; the value of each constant and additional
              ; constraints on each parameter are specified below.
 

VERSION, TEMPO, RESOLUTION, BLOCK_START, BLOCK_END, PLAY_BLOCK SET_VOLUME REPEAT are pre-defined constants.

Following table shows the valid range of the parameters:

Parameter	Valid Range	Effective Range	Default
tempo_modifier	5<= tempo_modifier <= 127	20bpm to 508bpm	120bpm
resolution_unit	1<= resolution_unit <= 127	1/1 note to 1/127 note	1/64 note
block_number	0<= block_number <= 127	-	-
note	0<= note <= 127 or SILENCE	C-1 to G9 or rest	-
duration	1<= duration <= 127	-	-
volume	0<= volume <= 100	0% to 100% volume	100%
multiplier	2<= multiplier <= 127	-	-

The frequency of the note can be calculated from the following formula:

     SEMITONE_CONST = 17.31234049066755 = 1/(ln(2^(1/12)))
     note = ln(freq/8.176)*SEMITONE_CONST
 

The musical note A = note 69 (0x45) = 440 Hz.
Middle C (C4) and SILENCE are defined as constants.

The duration of each tone is measured in units of 1/resolution notes and tempo is specified in beats/minute, where 1 beat = 1/4 note. Because the range of positive values of byte is only 1 - 127, the tempo is formed by multiplying the tempo modifier by 4. Very slow tempos are excluded so range of tempo modifiers is 5 - 127 providing an effective range of 20 - 508 bpm.

To compute the effective duration in milliseconds for a tone, the following formula can be used:

     duration * 60 * 1000 * 4 / (resolution * tempo)
 

The following table lists some common durations in musical notes:

Note Length	Duration, Resolution=64	Duration, Resolution=96
1/1	64	96
1/4	16	24
1/4 dotted	24	36
1/8	8	12
1/8 triplets	-	8
4/1	REPEAT 4 <note> 64	REPEAT 4 <note> 96

Example

    // "Mary Had A Little Lamb" has "ABAC" structure.
    // Use block to repeat "A" section. 

    byte tempo = 30; // set tempo to 120 bpm 
    byte d = 8;      // eighth-note 

    byte C4 = ToneControl.C4;; 
    byte D4 = (byte)(C4 + 2); // a whole step 
    byte E4 = (byte)(C4 + 4); // a major third 
    byte G4 = (byte)(C4 + 7); // a fifth 
    byte rest = ToneControl.SILENCE; // rest 

    byte[] mySequence = {
        ToneControl.VERSION, 1,   // version 1
        ToneControl.TEMPO, tempo, // set tempo
        ToneControl.BLOCK_START, 0,   // start define "A" section
        E4,d, D4,d, C4,d, E4,d,       // content of "A" section
        E4,d, E4,d, E4,d, rest,d,           
        ToneControl.BLOCK_END, 0,     // end define "A" section
        ToneControl.PLAY_BLOCK, 0,    // play "A" section
        D4,d, D4,d, D4,d, rest,d,     // play "B" section
        E4,d, G4,d, G4,d, rest,d,
        ToneControl.PLAY_BLOCK, 0,    // repeat "A" section
        D4,d, D4,d, E4,d, D4,d, C4,d  // play "C" section
    }; 

    try{ 
        Player p = Manager.createPlayer(Manager.TONE_DEVICE_LOCATOR); 
        p.realize(); 
        ToneControl c = (ToneControl)p.getControl("ToneControl"); 
        c.setSequence(mySequence); 
        p.start(); 
    } catch (IOException ioe) { 
    } catch (MediaException me) { }

 

Field Summary

static byte	BLOCK_END Defines an ending point for a block.
static byte	BLOCK_START Defines a starting point for a block.
static byte	C4 Middle C.
static byte	PLAY_BLOCK Play a defined block.
static byte	REPEAT The REPEAT event tag.
static byte	RESOLUTION The RESOLUTION event tag.
static byte	SET_VOLUME The SET_VOLUME event tag.
static byte	SILENCE Silence.
static byte	TEMPO The TEMPO event tag.
static byte	VERSION The VERSION attribute tag.

Method Summary

void	setSequence(byte[] sequence) Sets the tone sequence.

Field Detail

VERSION

public static final byte VERSION

The VERSION attribute tag.

Value -2 is assigned to VERSION.

See Also:

Constant Field Values

TEMPO

public static final byte TEMPO

The TEMPO event tag.

Value -3 is assigned to TEMPO.

See Also:

Constant Field Values

RESOLUTION

public static final byte RESOLUTION

The RESOLUTION event tag.

Value -4 is assigned to RESOLUTION.

See Also:

Constant Field Values

BLOCK_START

public static final byte BLOCK_START

Defines a starting point for a block.

Value -5 is assigned to BLOCK_START.

See Also:

Constant Field Values

BLOCK_END

public static final byte BLOCK_END

Defines an ending point for a block.

Value -6 is assigned to BLOCK_END.

See Also:

Constant Field Values

PLAY_BLOCK

public static final byte PLAY_BLOCK

Play a defined block.

Value -7 is assigned to PLAY_BLOCK.

See Also:

Constant Field Values

SET_VOLUME

public static final byte SET_VOLUME

The SET_VOLUME event tag.

Value -8 is assigned to SET_VOLUME.

See Also:

Constant Field Values

REPEAT

public static final byte REPEAT

The REPEAT event tag.

Value -9 is assigned to REPEAT.

See Also:

Constant Field Values

C4

public static final byte C4

Middle C.

Value 60 is assigned to C4.

See Also:

Constant Field Values

SILENCE

public static final byte SILENCE

Silence.

Value -1 is assigned to SILENCE.

See Also:

Constant Field Values

Transfer interrupted!

Method Detail